En bærbar, batteridreven DAC og hodetelefonforsterker, alt i et! Fungerer med Apple iOS iPhone, iPad og iPod
Hør på musikk med høy kvalitet mens du er på reise, arbeidsplassen, eller hvor enn du skulle befinne deg!
Ønsker du å la en venn høre på musikken din? Ikke noe problem, for med denne kan to hodetelefoner brukes samtidig!
Innganger:
- Digital USB for å koble til iEnhet
- Digital Mini USB til USB for å koble til PC/Mac
- Analog 3.5mm (4-pin) mini jack for mobil (Android/iOS), PC eller Mac
Utganger:
- Analog 3.5mm (4-pin) mini jack ut for å koble til hodetelefoner (to stykk, begge kan brukes samtidig)
- Optisk SPDIF ut for å koble til optisk avspillingsenhet
Viser hvilken oppløsningen (KHz) lydkilden gir fra seg!
- USB DAC modus med PC/Mac: fra 44.1KHz til 192KHz
- USB DAC modus med analog kilde viser kun 48KHz
- iDevice (iEnhet) modus viser kun 44.1KHZ
- iDevice (iEnhet) modus med analog kilde viser kun 44.1KHz
Annet:
Bruk med PC krever drivere, som du finner HER!
Mer utdypet informasjon finner du HER!
ADL X1 | Alpha Design Labs X1 24/192 USB DAC Headphone Amplifier
ADL X1 compatible Devices
• i Phone5 (lightning cable), i Phone4S, i Phone4, i Phone3GS
• i Pod touch 5th Gen (lightning cable), i Pod touch 4th Gen, i Pod touch 3rd Gen,
• i Pod nano 7th Gen (lightning cable), i Pod nano 6th Gen, i Pod nano 5th Gen
• i Pod classic 160G(2009)
• i Pad mini, i Pad 2, i Pad 3rd Gen
Headphone listening is an intimate sonic experience and most enthusiasts employ headphone amplifiers and a good pair of ‘phones– like the ADL H118! The headphone amplifier determines the quality of sound in hand with the headphones.
The X1 is small, discrete but highly specified with inputs supporting iOS digital at up to 16/48 via APPLE MFI certified USB Cable for iPod, iPhone, iPad devices. The X1 also runs 24/192 SPDIF with high-resolution files from PC via the PC’s USB output. There’s an analog line-level 4-pin 3.5mm input and a 4-pin 3.5mm output for headphones in the 12~600 ohm range. The 4-pin input supports 3.5mm Remote and Mic Earphones. The 3.5mm TOSLINK optical output delivers USB source signal up to 24/192. There’s a convenient GND TRRS switch making it easy to change from one 4-pin set of ‘phones to another.
• High-quality volume control and On/Off switch (front)
• Gold-plated 3.5mm input connector: Analog line input (switched)
• Gold-plated 3.5mm output connector-1: Headphone or Analog out
• Gold-plated 3.5mm output connector-2: Headphone / Analog out or 3.5mm optical output for 24/192 (MAX) SPDIF
• 4-layer gold-plated printed circuit board with >1oz copper thickness
• Gold-plated USB A socket for 16/48 iDevices (iPod/iPhone/iPad)
• Gold-plated USB mini-B connector for 24/192 PC operation
• Recharges via PC USB connection or AC/DC switching power adapter (sold separately)
• Attractive aluminum cover and ABS plastic body
• Max headphone output at 1%THD @ 1KHz: 34mW(12 ohm), 60mW(16 ohm), 82mW(32 ohm), 86mW(56 ohm), 36mW(300 ohm), 19mW(600 ohm)
• Channel separation 60～64dB (1KHz) 33ohms -50dB/<=±3dB
• Frequency characteristics 20Hz～20kHz (±0.5dB)
• Total Harmonic Distortion 0.033% (33ohms) , <0.02% (300ohms) , 0.0085% (600ohms)/1mW
• S/N Ratio 95.5dB/32ohms , 98.1dB/56ohms , 101.6dB/300ohms, 102.1dB/600ohms
• Charge time approximately 4～5 hours (AC/DC 5V, 1.0-2.0A switching adaptor – sold separately)
• Charge time: approximately 7 hours (DC 5V 0.5A USB bus power)
• Music playback time up to 7.5 hours when fully charged
• Dimensions 68 (W) x 118 (D) x 16.5 (H) mm
• Weight: 147g Approx.
.
technical-specifications
• 24-bit/192kHz XMOS High-Performance Streaming Controller supports ASIO and Asynchronous mode
• USB 2.0 High Speed (480Mbit/s) compliant supporting 8/16/32/44.1/48/88.2/96/176.4/192 kHz sampling rates
• High-performance ESS-ES9023 24-bit/192kHz DAC chip
• Maxim MAX9724C Power IC , Low-RF Direct-Drive Stereo Headphone Amplifier with 1.8V compatible shutdown
• TI- LMV832 Dual 3.3 MHz EMI-Hardened Low-Power CMOS OP AMP
• Power Supply 1: DC 5V 500mA ~ 2000mA
• Power Supply 2: DC 3.7V 2600 mAh Li-ion rechargeable battery
