Sutherland: Argentum

MM / MC RIAA

Prisreduksjon fra kr 210000,00 til kr 176500,00 - på grunn av styrket krone mot USD

NOK176 500,00 inkl. mva.

Produktinfo

The new Argentum Phono Preamp delivers the advantages of a silver signal path.
– Ron Sutherland

DESIGN PHILOSOPHY

The best starting point was the Phono Blocks.
For many years now, they have performed beautifully, setting a very high standard. They compare very favorably with cost-no-object phono preamps.
Just buying a roll of silver wire was not good enough. This was an opportunity to refine and optimize every aspect of signal flow.

 

The Argentum audio board is a 1/8" thick, glass-reinforced, epoxy laminate sheet. An extra thick, premium grade circuit board material.

Provide a low noise, low-impedance, highcapacity source of power for analog circuitry.

Each mono Argentum audio board has over 100,000 uF of low ESR, high-current electrolytic capacitors. They do the ‘heavy lifting’ job of filtering and power reserve.

An additional 12 Wima MK4P metalized film polyester capacitors extend the low-impedance performance to the higher frequencies.

To take full advantages of this extreme capacity requires strategic placement.

 

Load Settings

Cartridge loading is determined by the resistor value installed in the LOADING resistor socket.

Dale/Vishay RN65-style resistors are included with the following values:: 

49.9 Ohms (49R9)

100 Ohms (1000)

200 Ohms (2000)

475 Ohms (4750 )

1000 Ohms (1001)

47.5k Ohms (4752)

 

Gain Settings

Gain is determined by the resistor value installed in the GAIN resistor socket.

Dale/Vishay RN65-style resistors are included with the following values:: 

45 dB gain (1210)

50 dB gain (75R0)

55 dB gain (40R2)

60 dB gain (20R0)

63 dB gain (15R0)

67 dB gain (10R0)