The Seismix 3 incorporates a new in-house designed 275mm driver, developed for high level low frequency reinforcement. Geometry enhancements within the magnet structure has seen linear cone travel has increase by a massive 30% with superior driver control. Musicality has not been overlooked at the expense of sheer low frequency output, with the Seismix 3 able to deliver all the subtleties of a jazz quartet to a classical masterpiece. Get a deep bass experience with the Seismix 3.
Explosions and crashes are a breeze for the Seismix. We were not only physically massaged by the power of ‘Star Trek’ deep space explosions but we were just as impressed with the depth at which the effects punched through. And the sensation of bass wallop is enhanced by the sub’s tremendous control and grip of all low-end output; this is the kind of subwoofer that doesn’t trade bass tightness for depth, as is sometimes the case.
- Australian Hi-Fi Best Buys - Australia
Frequency Range:22Hz - 200Hz (-6dB) in room response. Low pass filter 50 - 200Hz, 2nd order. High pass filter to limit driver excursion below 26Hz..
Bass Driver(s):Nominal 275mm (11”) diameter doped paper cone driver, 50mm (2") voice coil wound on high powered Kapton former, with vented magnet assembly..
Amplifier Power:300 watts RMS into the nominal 4 ohm driver Maximum instantaneous power 600 watts.
Amplifier S/N Ratio:>85dB.
Distortion - Input to Speaker:<0.2% - @ 200 watts RMS.
Line Level Inputs:Left Input (mono) – 300mV RMS for maximum output or Left + Right Input (stereo) – 150mV RMS for maximum output .
Output:122dB maximum SPL in room response.
Auto Power On / Off:20 minute delay before switching to standby after no input signal.
Phase Select:0º to 180º continuously variable (relative to input signal).
Enclosure Type:Bass reflex, front vented with internal / external flaring.
Dimensions:450mm high (including feet) x 360mm wide x 410mm deep (including grille).
Material:17mm MDF.
Finish:Vinyl or lacquered timber veneer.
Volume:43 litres internal.
Weight:18kg.
