The upper cabinet houses two 150mm ultra-linear drivers that feature high mass phase plugs and Nextel treated paper cones to reach high rigidity and fast natural audio response.
Adaptive rubber surround provides an ideal match to the cone over the total frequency range.
The extra large magnet system with long and lightweight CCAW voice coil allows perfect coil excursion and low distortion due to excellent transient response.
Solid copper rings are mounted above and below the T-shaped pole piece to reduce non-linear and modulation distortions and to increase the overload margin.
The driver is completed by an extremely stiff and stable skeleton in aluminium/magnesium to avoid airflow noises and to increase rigidity and lightness.
WOOFERS
Two 220mm ultra-linear slightly horn loaded, light drivers with 18gm mass with Nextel treated paper producing a fast natural audio response in low frequencies
Bass drivers feature large magnet design with bumped back-plate: the large and dampened platform at the back improves stiffness while the extra-long and light weight CCAW voice coil, allows extreme coil excursion, low distortion and excellent transient response
Giant copper rings mounted above and below the T-shaped pole piece reduce distortion for better overload margin
High mass phase plug reduces compression due to temperature variations in the voice coil
Long-term power handling is increased to eliminate resonances from cavity inside the voice coil former
CROSSOVER
Passive Crossover Low-High Dual-Slop with cut at 200Hz & 2200Hz and resistive design enables ultra-linear load to manage amplification without stress on the power supply, even at a nominal impedance of 4Ω.
A sophisticated triple crossover network, featuring summing midrange multi-slope design, integrates perfectly drivers of the Array and with anti-resonance thick glass-fibre board, rewards the listener through a close field smooth audio experience.
Air winding, hand-made coils and selected audio grade capacitors and exclusive graphite custom GN resistors complete one of the greatest crossover available today.
SPECIFICATIONS
Frequency response: 30 Hz – 30.000 Hz, Dual Slope QB3 N°4
Sensitivity: 89dB SPL (2.83V/1 m)
Nominal impedence: 4 ohm semi-resistive
Power handling: 30W – 300W
Suggested min. listening distance: 1.5/2.0m
Dimensions: 1280 H | 357 W | 665 D
Weight: net weight 180 Kg, shipping weight 200 Kg (intended per pair)
FINISHES
Cabinet & Stand
Black Laquer
Side Panels
Black Glossy Grand Piano
or White lacquer
or Italian Walnut
